Gate Installation & Repair in Orlando, FL
From simple garden gates to automated driveway entries, we build and repair gates that work right every time you use them.
Gate Installation & Repair in Orlando, FL
A gate is the hardest-working part of any fence. It swings or slides multiple times a day, supports hardware under constant stress, and takes more physical abuse than any other section of your fence line. That's exactly why gates fail more often than the fence panels around them, and why getting the installation right from the start matters so much. We install and repair gates of every type across Orlando — walk gates, driveway gates, pool gates, garden gates, rolling commercial gates, and fully automated entry systems. If you've been dealing with a gate that sags, sticks, won't latch, or has just given up entirely, we'll sort it out. For help deciding on gate style, read our breakdown of <a href='/blog/swing-vs-sliding-gates'>swing vs. sliding gates</a>.
Gate posts are the foundation of the whole operation, and they need to be significantly beefier than standard fence posts. A swinging gate puts lateral force on its hinge post every time it opens and closes, and in Florida's sandy soil, an undersized or shallow-set gate post will start leaning within months. We set gate posts deeper and wider than line posts, use larger diameter posts or steel reinforcement, and pour oversized concrete footings. For automated gates, the structural requirements go up even further because the gate operator hardware adds weight and torque to the system. We handle the full scope on automation projects — the gate, the operator, the wiring, the remote controls, and the safety sensors.
Pool gate compliance is another area where we get a lot of calls. Orange County requires pool barrier gates to be self-closing and self-latching, with the latch on the pool side at a height that small children can't reach. We install code-compliant pool gate hardware on new fences and retrofit existing gates that don't meet current standards. Whether you need a new gate added to an existing fence, a broken gate repaired, or a full automated entry system installed at your home in Dr. Phillips or your business off International Drive, call us at (704) 749-0642 and we'll come take a look.
Get Your Free Estimate
What We Offer
Our gate installation & repair services cover everything you need for your Orlando property.
Oversized Gate Posts
Gate posts get oversized concrete footings and larger diameter posts than the rest of the fence line. This prevents the sagging and leaning that kills gate function, especially in Florida's shifting sandy soils.
Automated Gate Systems
We install swing and slide gate operators from LiftMaster, Viking, and other commercial-grade brands. Full systems include remote controls, keypads, safety sensors, and battery backup so the gate still works during Orlando's frequent power outages from storms.
Pool Code Gate Compliance
Every pool gate we install meets Orange County's barrier code requirements. Self-closing hinges, self-latching hardware, and proper latch height are non-negotiable on pool enclosures. We also retrofit existing gates that fail inspection.
Custom Gate Design
Arched tops, decorative ironwork, horizontal slat modern designs, and estate-style double swing gates. We build custom gates that match your fence style and your property's character, whether that's a craftsman home in College Park or a modern build in Baldwin Park.
Gate Repair & Adjustment
Sagging gates, broken hinges, stuck latches, and failed operators — we repair all of it. Often a gate just needs a hinge adjustment and a post re-plumb to work like new. We diagnose the real problem before throwing parts at it.
Our Process
Here's what to expect when you choose Orlando Fence for gate installation & repair.
Assessment & Gate Planning
We evaluate the opening, measure for the gate, check post condition, and discuss how the gate will be used — foot traffic, vehicle access, pet containment, or pool safety. This determines the right gate type and hardware.
Design & Hardware Selection
You'll choose the gate style, material, and hardware. For automated gates, we spec the operator, access controls, and safety devices. Everything is mapped out before we start building.
Post Setting & Gate Fabrication
Gate posts are set in oversized concrete footings. Custom gates are fabricated to exact measurements. We don't use pre-hung gates that force you into standard sizes — every gate is built to fit your specific opening.
Installation, Adjustment & Testing
We hang the gate, adjust hinges and latches for smooth operation, and test everything thoroughly. Automated gates get a full cycle test with safety sensor verification before we sign off.
Frequently Asked Questions
Common questions about gate installation & repair in Orlando, FL.
Why does my gate sag or drag on the ground?
Ninety percent of the time, it's the hinge post. The post is either leaning because it wasn't set deep enough in concrete, or the post itself has rotted below ground (on wood gates). We can either re-set or replace the post and re-hang the gate. Sometimes the gate frame itself has racked, and we can add a diagonal brace or anti-sag kit to straighten it out.
How much does an automated driveway gate cost?
Automated driveway gate systems in Orlando typically range from $3,000 to $8,000+ depending on the gate material, size, operator type, and access control features. A basic single-swing automated gate is on the lower end; a custom double-swing or sliding gate with keypad and intercom is on the higher end. Call us at (704) 749-0642 for a quote specific to your property.
Can you add a gate to my existing fence?
Yes, this is one of our most common jobs. We cut into the existing fence line, set proper gate posts, and install a gate that matches your current fence style. It's straightforward as long as your existing fence is in decent condition. If it's not, we'll let you know what fence repairs should happen at the same time.
What kind of gate do I need for a pool fence?
Orange County requires pool gates to be self-closing and self-latching, with the latch positioned at least 54 inches from the ground or on the pool side of the gate where children can't reach it. We install pool gates in aluminum, vinyl, and wood that meet all these requirements. The hardware is specific to pool code, so don't try to use standard gate hardware — it won't pass inspection.
Ready for Gate Installation & Repair?
Get a free, no-obligation estimate from Orlando Fence. We'll come to your property, assess the job, and give you a straightforward price.